FOBENG · PUMP SERIES
HW Horizontal Volute Mixed-Flow Pump
- Duty review
- Configuration
- Technical inquiry
HW series overview
HW is identified as a horizontal volute mixed-flow pump. The manufacturer table supplies paired flow and head values at stated speeds and labels shaft power separately from matching power. The selected 150HW-5 reference gives 180 m³/h at 5.0 m head, while 150HW-8 gives 180 m³/h at 8.0 m. Both selected entries use 1450 r/min. The power shown below is shaft power; confirm motor selection, the full curve and installation for the proposed duty.
Selected catalogue references
| Model | Flow Q (m³/h) | Head H (m) | Shaft power (kW) | Speed (r/min) |
|---|---|---|---|---|
| 150HW-5 | 180 | 5.0 | 2.99 | 1450 |
| 150HW-8 | 180 | 8.0 | 4.78 | 1450 |
Source: FOBENG Product Manual, printed page 21 (PDF page 23). Select a model reference above to open its source page.
Keep each catalogue entry with its complete model, stated speed and performance basis. These selected entries are reference data, not a complete operating curve or installation drawing. Confirm the current offered configuration against your required duty.
Documents and quotation
Download the original manufacturer product manual (PDF, 28 pages)
Send the complete series and model, liquid and temperature, required flow and head, inlet or suction conditions, installation constraints and electrical supply. Request the applicable model curve, dimensional drawing and configuration details with the quotation.
Share the required flow and head, liquid and temperature, power supply, quantity and destination. The proposed model, materials, seal, delivery schedule, packaging and commercial terms are confirmed in the quotation and order documents.
Request a pump quotation or review our RFQ preparation guide.
